Mines Strategy Simulator

Build and test Mines strategies by changing the number of mines, cash-out depth, bet size and bankroll across many simulated sessions.

Configuration

Mines Strategy Scenario

Theoretical RTP

Maximum 2,000,000 simulated rounds per run.

Results will appear here

Configure Mines settings, choose a betting strategy and run many simulated sessions to compare bankroll outcomes.

Strategy condition

Condition 1

Session protection

Strategy limits

Testing a Mines Strategy at a Fixed Cash-Out Target

The simulator lets users test a Mines strategy across repeated independent sessions, keeping one board configuration and cash-out target fixed while betting rules determine how stakes develop from earlier results.

The grid size, mine count and target number of safe picks define the round being tested, with a fixed multiplier paid when that target is reached. A successful cash out produces a WIN signal; encountering a mine before the target produces a LOSS. The strategy responds to these results by setting the next stake or ending the session. It does not change the probability of reaching Cash Out.

This separates the round’s mathematics from the effects of stake progression. Under the same Mines configuration, different rules can produce different wagering totals, balance paths and stopping points. The simulator compares those effects across a sample of sessions, rather than judging an approach from a single cash out or mine loss.

Defining the Mines Outcome Used by the Strategy

Before a betting rule can respond to a result, the simulator first needs a defined round configuration. The board settings determine the available safe tiles and mines, while the cash-out target establishes which result counts as a WIN or LOSS.

Board, Mines and Theoretical RTP

The GambleTools model supports 3×3, 4×4, 5×5 and 6×6 boards, configurable mine counts and theoretical RTP settings from 96% to 100%. The Stake preset uses a 5×5 board with 1–24 mines and fixed 99% RTP.

The grid and mine count establish the round’s safe-tile configuration. RTP affects the payout attached to a successful cash out, rather than the chance of avoiding mines. These settings define the scenario to which the betting rules will respond.

Cash-Out Depth, Fixed Multiplier and WIN / LOSS Results

Safe picks to Cash Out specifies how many successful selections a round must reach. That depth has a corresponding multiplier under the selected board, mine count and RTP. Both the target and its multiplier remain fixed throughout the session.

The strategy uses two result signals:

  • WIN: the required number of safe picks is reached and the cash-out multiplier is paid.
  • LOSS: a mine is encountered before that target, and the round’s stake is lost.

Here, WIN identifies a successful cash out rather than a separate guarantee of session profit; its monetary effect depends on the multiplier and stake. The simulator resolves each round mathematically rather than opening tiles visually. A Mines betting strategy can react to the resulting signal, but it cannot move the target, select safer cells or change the round’s success probability.

Setting the Bankroll and Simulation Workload

The session settings establish how much virtual funding is available and how large the simulated sample will be. Bankroll and base stake apply to each session, while the session count determines how many independent repetitions are generated.

Starting Balance and Bet per Round

Starting balance supplies the virtual bankroll at the beginning of a session. Bet per round sets the base stake: the amount used initially and the reference value for progression rules or a bet reset. As results arrive, the selected rules may change the stake required for subsequent rounds.

Every session starts again with these same configured values. An ending balance or increased stake never carries into the next session. This allows a Mines game strategy to be examined through repeated attempts from the same starting position.

Rounds per Session, Session Count and Run Limit

Rounds per session sets the planned length of one attempt. Number of sessions specifies how many independent repetitions the simulator generates. For example, 500 rounds across 1,000 sessions requests 500,000 rounds in total.

The requested workload cannot exceed 2,000,000 planned rounds per run. This limit applies to Rounds per session multiplied by Number of sessions.

The completed total can be smaller than the requested workload. If a session cannot fund its next stake or reaches a stopping condition, it ends before its planned rounds are exhausted. An early stop affects that session only; the remaining sessions still begin independently under the same configured conditions.

Changing the Next Bet After a Cash Out or Mine

Each Mines strategy preset connects the previous round’s result with the stake required for the next one. A cash out supplies a WIN signal; a mine supplies a LOSS signal. The presets differ in how they respond to those signals, while the board and cash-out target stay unchanged.

Fixed Bet as the Control Case

With No strategy · Fixed bet, every round uses the configured base stake. Neither a cash out nor a mine changes the next bet amount.

This provides a control case for examining stake progression. Keeping the other settings consistent makes it easier to see how changing wager sizes affects balance movements, total wagering and session completion.

Martingale and Delayed Martingale After Mine Losses

Martingale doubles the next stake after every mine loss. A successful cash out resets it to the base Bet per round. With a three-credit base bet, consecutive losses produce stakes of 3, 6, 12 and 24 credits; a WIN returns the following stake to three credits.

Delayed Martingale postpones that escalation. The first two consecutive mine losses leave the base stake unchanged. The third loss doubles the following stake, and each further consecutive loss doubles it again. A successful cash out resets the stake to base.

The delay changes when larger wagers begin. It does not make the next round more likely to reach its target.

Paroli and D’Alembert After Round Results

Paroli increases the stake after successful cash outs: each WIN doubles the following bet, while a mine loss resets it to base. The increase follows the cash-out result classification, not the size of the net profit earned.

D’Alembert uses fixed increments instead. A LOSS adds one base-bet unit to the next stake; a WIN subtracts one base-bet unit. With a three-credit base, each adjustment is three credits, rather than a percentage change to the current wager.

These rules determine how much is staked on the next Mines round. They do not improve its success probability or theoretical return.

Building Rules That Can Change or End the Session

After a round settles, the simulator determines whether another wager can be placed and how large it should be. Custom conditions control that decision alongside the available bankroll and strategy limits. A session can end with credits remaining, even when its planned round count has not been reached.

Ordered Custom Conditions

Custom supports up to five conditions. Each combines a trigger, a threshold or value, a result type where relevant, and an action. Triggers can refer to bet counts, WIN or LOSS streaks, or profit or loss thresholds; actions can modify the stake, reset it or stop the session.

Conditions are processed in order, from 1 through 5. If several apply after the same round, a later action can change the stake already produced by an earlier one. Their order therefore forms part of the Mines strategy being tested.

Reset bet amount restores the configured base Bet per round. Stop session ends the individual session in which it is triggered; it does not cancel the other sessions in the simulation sample.

When the Next Stake Cannot Be Placed

A session stops when its balance is below the current stake needed for another round. For example, a balance of 18 credits cannot fund a 24-credit wager, even though the bankroll has not reached zero.

Maximum bet creates a separate boundary. A calculated stake strictly greater than the limit ends the session rather than being reduced to fit it. A stake equal to Maximum bet is permitted, provided the balance can fund it.

These are different stopping conditions: one is caused by insufficient bankroll, while the other is caused by the configured stake limit. Either can stop a session while credits still remain.

Ending at a Loss or Profit Threshold

Stop Loss and Take Profit measure the cumulative result relative to Starting balance. A session ends when its loss or profit reaches or exceeds the corresponding threshold.

With a starting balance of 500 credits:

  • Stop Loss of 75: stop at a balance of 425 credits or lower.
  • Take Profit of 75: stop at a balance of 575 credits or higher.

The round that crosses a threshold settles before the session stops. Its result can therefore leave the final balance beyond the boundary; these settings do not guarantee an exact ending balance.

Reading Results at Round Level and Session Level

The summary answers two different questions: how often did rounds reach Cash Out, and where did the sessions finish financially? Round success and session profit measure different things. Reading them separately helps show how a Mines betting strategy changed the amounts wagered around those outcomes.

Successful Cash Outs and Completed Rounds

Successful cash outs counts all rounds that reached the configured safe-pick target across the sample. The summary also shows their share of completed rounds and the fixed multiplier paid for each successful cash out.

Total rounds is the actual number completed across all sessions. If every session reaches its planned length, this equals Rounds per session multiplied by Number of sessions. Early stops reduce that total.

The cash-out share uses this completed-round count as its denominator. It does not describe the percentage of profitable sessions: frequent cash outs can coexist with an overall loss, depending on the payout multiplier and the stakes placed on winning and losing rounds.

Ending Balances Across the Session Sample

Average final balance is the mean of all session ending balances, including sessions that stopped early. It summarizes the sample’s financial outcome without showing how widely individual results differed.

Best session and Worst session identify the highest and lowest final balances in that sample. They are selected by where the sessions ended, rather than by their highest temporary peak or deepest temporary decline.

These extremes are observed results from the current run. They do not establish upper or lower limits for another sample.

Profitable Sessions and Early Stops

A session is profitable only when its final balance is strictly above Starting balance. Finishing at the starting amount does not count as profitable.

Stopped early counts sessions that completed fewer than their planned rounds. This classification concerns session length, rather than whether money was gained or lost.

The categories can overlap. A session ending at Take Profit can be both profitable and stopped early, while a session that loses credits can still complete every planned round.

Theoretical RTP and Simulated RTP

Theoretical RTP belongs to the selected Mines configuration and remains fixed when betting rules change. Simulated RTP measures the return actually generated across the completed sample:

Total returned credits ÷ total wagered credits × 100

This calculation combines monetary totals across all sessions; it is not an unweighted average of individual session RTP values. Larger wagers contribute more to those totals than smaller ones.

Stake adjustments change wagering exposure and the credits returned by particular outcomes without changing theoretical RTP. The sample’s simulated percentage can finish above or below that theoretical value.

Tracing Bankroll Paths Through the Planned Session

An ending balance does not show the sequence that produced it. The line chart traces balance changes as cash outs, mine losses and stake adjustments accumulate. For a Mines strategy with changing wagers, similar round results can have very different monetary effects at different points in the session.

Average Path and the Two Selected Sessions

The Average line combines balances across all simulated sessions at each round position. It shows the sample’s mean balance as the planned session progresses, rather than a sequence experienced by any one session.

The Best and Worst lines follow two individual sessions: those with the highest and lowest final balances. Their earlier movements remain visible, including declines before recoveries or gains before later losses.

These sessions are selected by where they finish. The Best session need not have the highest balance at every earlier round, and the Worst session may have spent part of its run above the average.

What Happens After a Session Stops Early

When a session stops, no further Mines rounds are generated for it. The chart carries its final balance through the remaining planned round positions, creating a horizontal tail that represents an inactive session.

For example, if a session ends after round 80 of a planned 200, its balance stays unchanged on the chart from that stopping point through round 200. Those later points do not represent additional cash outs or mine losses.

The stopped session also remains included in the Average line at its final balance. This keeps the average based on the full sample throughout the chart, rather than only on sessions that are still active.

Seeing Where the Session Balances Ended

The Final balance distribution groups sessions into ending-balance ranges. Each bar shows how many finished within a particular range, while the Starting balance marker shows where those endings sit relative to the initial bankroll.

A concentration of sessions within a few neighbouring ranges indicates similar ending balances in the current sample. A wider spread shows greater differences between sessions. The distribution can also be asymmetric: many sessions may finish in lower ranges while a smaller group extends much further upward, or the reverse. An average alone can conceal these uneven patterns.

Read ranges that cross the starting-balance marker carefully: they can contain losing, break-even and profitable sessions. The Profitable sessions summary provides the precise share ending strictly above the starting amount.

This chart describes where the generated sessions finished, including those that stopped early. Its shape helps compare the spread of outcomes under the configured rules, but it does not forecast the next Mines session or establish a live-game probability distribution.

Comparing Mines Betting Rules Under the Same Scenario

A useful comparison changes the rules while preserving the round they respond to. To examine a Mines strategy’s effect on bankroll outcomes, keep the Mines configuration, cash-out target and session resources consistent. Otherwise, a different result may come from a changed game configuration rather than the stake progression.

Keep the Mines Scenario Fixed

Use the same settings for both tests:

  • Round configuration: preset, grid size, mine count, Safe picks to Cash Out and theoretical RTP.
  • Session setup: Starting balance, base Bet per round, Rounds per session and Number of sessions.
  • Strategy limits: Maximum bet, Stop Loss and Take Profit, where enabled.

Then change the betting preset or Custom conditions being examined. For example, comparing Fixed Bet with Martingale at the same cash-out depth isolates the change in staking rules more clearly than also increasing the mine count.

Separate runs still generate different random samples. Consistent inputs make a comparison easier to interpret, but they do not make every observed difference attributable to the rules.

Compare the Outcome You Actually Care About

Choose the measure before deciding which setup looks preferable. Average final balance describes the sample’s mean ending position; Profitable sessions measures how often sessions finished ahead; Stopped early shows how often the planned length was not completed. The final-balance distribution adds information about spread that these headline figures can conceal.

Stake escalation and stopping conditions also matter. Consider whether the rules require increasingly large wagers, encounter Maximum bet limits or end sessions through Take Profit. The overall early-stop percentage alone does not distinguish those causes.

A Mines game strategy may compare favourably on one criterion and poorly on another - for example, a higher profitable-session share alongside a lower average ending balance. One favourable sample does not establish a durable edge or a universally superior approach.

What Changes When You Use a Mines Strategy

A Mines strategy controls the amount committed to subsequent rounds and when the session ends. Those decisions can change total wagering exposure, the bankroll path and the distribution of final balances. They also affect whether the available balance can fund another round.

The round itself retains the selected grid, mine count, cash-out depth and payout settings. Stake progression does not change safe-pick or mine probabilities, the target’s fixed multiplier or theoretical RTP. Increasing a wager after a mine loss puts more credits on the next result; it does not make reaching Cash Out more likely.

For a configuration below 100% RTP, changing stakes after WIN or LOSS results cannot turn a negative-expectation configuration into a positive-expectation one. Rules can reshape session outcomes and stopping behavior, but a profitable simulated sample does not demonstrate that the underlying mathematical disadvantage has been removed.

Use the Mines Demo for interactive tile selections and individual virtual rounds. For the calculations behind safe-pick odds, cash-out multipliers and theoretical return, see the Mines Calculator.

Published by GambleTools.

Our tools and guides are based on the mathematical rules, payout logic and simulation behavior implemented in each tool.